- Phone: 59/ 858 95 55
- biuro@jrokna.com
- Open 8:00 am - 4:00 pm
A six-chamber system with a depth of 85 mm with the possibility of using fillings up to 51 mm wide. The IDEAL 7000 series opens up new possibilities in the production of external doors. Thanks to the multi-chamber structure, installation depth of 85 mm and the possibility of using glazing units and fillings up to 50 mm wide, it was possible to significantly improve the thermal insulation parameters of the structure, reaching the U f value of up to 1.2 W / m 2 K. As part of the system solution, a low door threshold of 20 mm is available, which meets the requirements of barrier-free construction and enables trouble-free entry and exit. Specially shaped threshold feet allow for connection with additional system profiles, such as extensions. The wide aluminum drip efficiently drains water to the outside
Aluplast Ideal 7000 external door with an overlay
filling covering the leaf profile
The Ideal 7000 series includes a new system
solution for exclusive front doors with an elegant and
simple design. Thanks to the new door profile, dedicated
to external doors with overlay fillings covering the
leaf plane, aluplast entrance doors meet the high
aesthetic requirements set by architects. The new
solution for external doors has been developed in
cooperation with all leading manufacturers of fillings.
The result: thanks to the installation depth of the new
sash variant reduced by 4 mm to 81 mm, all common
infills can be used without changing the gaskets with
the system depth of profile construction of 85 mm.
Exceptional thermal parameters (Uf value = 1.2 W / m²K)
Installation depth 85mm
Steel reinforcements with large cross-sections guarantee appropriate static and strength parameters
Thickness of glazing or panel filling up to 51 mm
Delicate design with a wing height of only 116 mm
Optimized new external sealing system in frame and post
The external sealing system allows the installation of massive hooks
A low aluminum threshold with a thermal break